Get Free Delivery With No Minimum Order

Frequently bought together
Brand : BREMED
BREMED COPRESSOR NEBULIZER
280
- Sku : I-024618
Key features
The Bremed Compressor Nebulizer operates via an oilless, maintenance-free piston pump powered by mains electricity at 220V/50Hz or 120V/60Hz, with a power consumption of 65W. It delivers a medication capacity of 6-8ml, an average nebulization rate above 0.3ml/min, an air flow range of 8-10 l/min, and a particle size with an MMAD of 3-5μm. The unit operates at a compressor pressure range of 30-45 Psi and produces a noise level of 60 dBA. The included accessories set consists of one adult mask, one pediatric mask, one atomizer, one mouthpiece, one flexible tube, and one filters set.- Brand: Bremed
- Product Type: Nebulizer
- Format: Tabletop Device
Frequently bought together
Description
Specification
Product Features
- Compressor Type: Features an oiless, maintenance-free piston pump compressor.
- Power Supply: Compatible with dual voltage input - 220V/50Hz and 120V/60Hz.
- Particle Size: Produces a respirable particle fraction of 0.5 to 5μm, with MMAD of 3-5μm and 80% of particles at 0.5μm.
- Nebulization Rate: Delivers an average nebulization rate above 0.3ml/min with an air flow range of 8-10 l/min.
- Medication Capacity: Accommodates 6-8ml of medication per fill.
- Included Accessories: Comes with an adult mask, pediatric mask, atomizer, mouthpiece, flexible tube, and a filters set.
How to Use
- The medication cup (atomizer) is filled with the prescribed liquid medication, up to the 6-8ml capacity.
- The appropriate mask (adult or pediatric) or mouthpiece is attached to the atomizer using the flexible tube.
- The device is connected to a power source compatible with 220V/50Hz or 120V/60Hz.
- The compressor is switched on, and the nebulized mist is inhaled through the mask or mouthpiece at the operating pressure range of 12-14.5 Psi.
- The session continues until the medication cup is empty, then the device is switched off and disconnected from power.
Care and Cleaning
- The atomizer, mask, mouthpiece, and flexible tube are disassembled and rinsed with clean water after each use.
- All detachable accessories are allowed to air-dry completely before reassembly or storage.
- The filters are inspected regularly and replaced as needed using the included filters set.
- The exterior of the compressor unit is wiped down with a dry cloth; liquids are kept away from the compressor body.
- No accessories are shared between users without thorough cleaning to avoid cross-contamination.
Safety Tips
- The device operates at a noise level of 60 dBA; placement in a quiet environment is recommended to confirm the unit is functioning within normal parameters.
- The compressor pressure range of 30-45 Psi and operating pressure of 12-14.5 Psi are fixed by design; no manual pressure adjustments are made by the user.
- The power supply voltage (220V/50Hz or 120V/60Hz) is verified against the local outlet specification before connecting the device.
- The medication cup is not overfilled beyond the 6-8ml maximum capacity to maintain correct nebulization performance.
- The device is kept out of reach of children when not in use and is only operated with the appropriate mask size - adult or pediatric - as included in the accessories set.
Storage
- The device and all accessories are stored in a clean, dry location away from moisture and direct sunlight.
- The compressor unit is stored in an upright position to protect the internal piston pump mechanism.
- All accessories, including the filters set, masks, and tubing, are kept together in a dedicated storage area to prevent loss or damage.
- The device is kept out of reach of children when not in active use.
-1744229570.gif)



